Durable - the term itself can be misleading. Many companies claim to have durable products, but what does that really mean to a customer? To show what Metalcraft means by durable labels, we had ours tested by Assured Testing Service, an accredited, independent materials testing laboratory, in a variety of demanding tests done to strict industry standards. The results for each test are summarized below.
Xenon Arc UV Weathering
GOV MIL-STD810h 2019 Method 505.7 Procedure II
Barcodes achieved passing grades after exposure to 56 cycles (1344 total hours) consisting of 20 exposure to Xenon arc light and 4 hours of no light, 50% relative humidity, 49°C (120°F) temperature
GOV MIL-STD-810H 20196 Method 507.6 Cycle B1
Barcodes achieved passing grades plus tag materials and printed copy survived exposure to 95% relative humidity at 80°F for 45 days.
Abrasion after Desert and Cryogenic Conditioning
ASTM G 195-18 & D7932-14 Section 11.5
Barcodes achieved passing grades plus tag materials and printed copy survived being exposed to 140°F and -37°F for 24 hours prior to performing 500 cycles of abrasion using CS-10 wheels with 100g total load.
GOV MIL-STD-810H 2019 Method 506.6 Procedure II
Barcodes achieved passing grade plus tag materials and printed copy survived 40 minutes of exposure.
GOV MIL-STD-810G 2014 Method 404.2 Procedure II
Barcodes achieved passing grades plus tag materials and printed copy survived 72 hours of exposure to Sodium Hypochlorite (5%) and Santimime 150 quaternary ammonium sanitizer 200 ppm in ambient room temperature conditions.
Pressure Wash/Wash Jet
Volvo STD 423-0015 2008
Barcodes achieved passing grade plus tag withstood exposure to 15 minutes of handheld high pressure 122°F water spray swept over samples at a rate of 1 wand sweep per second with a pressure of 1740 psig and a nominal flow rate of 4 GPM. Distance from nozzle to tag is 4” directed at a 90-degree angle.
So, what does all this testing mean? It means we literally put our money where our mouth is to show that extreme temperatures, chemicals and even abrasion are no match for Metalcraft RFID Tags. This makes Metalcraft RFID Tags the ideal solution for asset tracking applications like returnable containers, which are repeatedly exposed to environmental elements similar to what is described in the testing. We feel the RFID tags used to identify an asset should withstand these conditions as well as the assets themselves. Using Metalcraft RFID Tags in your asset tracking application will ensure asset visibility throughout the application as well as provide invaluable peace of mind!
Subscribe to our Newsletter ►
Posts By Topic
- May 5, 2021
Metalcraft to Launch New RFID Security TagConsumers tend to believe in the integrity of most of the people and products they come into contact with and use. Occasionally, however, the…
- May 5, 2021
RFID IML LabelsMaking its debut as the answer to identifying reusable goods permanently, RFID IML labels (In Mould Labels) presents itself as an uncompromising…
- May 5, 2021
Metalcraft's RFID Tags Tops In Industry Reports StudyAs RFID technology continues to mature, more companies are looking to implement the technology. RFID asset management is highly efficient and easy to…