Teflon Coated Nameplates


  • Dirt, grease or dried paint is easily removed
  • Teflon® coating also provides protection against long-term exposure to weather, extreme heat or cold, UV rays, and fluctuations in temperature
  • Photographically reproduced black copy, logos, and bar codes ensure accurate and reliable reads
  • Adhesives specially matched to surface for maximum adhesion or optional holes available for mechanical fasteners

Dirt, grease, grime, even dried paint easily clean off this revolutionary nameplate due to its durable Teflon® coating. Once clean, you get a fast, accurate bar code reading to track assets, fugitive emissions or work-in-process. The Teflon® coating also resists incidental or intermittent contact with strong acids and caustics, as well as temperatures up to 500°F.

Specifications Data
Material .012” thick anodized aluminum is standard. Optional thicknesses include .020”, .032”, and .063”. The Teflon® coating is a fluoropolymer, which is approximately .001” to .0015” thick.
Serialization All alphanumeric bar codes are photo imaged with a human-readable equivalent. Guaranteed no skips in sequence. Code 39 with 2.7 to 9.4 characters per inch (CPI) is standard. Other bar code symbologies including 128, I 2 of 5, 2D DataMatrix and QR Code.
Label Copy The printed label copy may include block type, stylized type, logos, and other designs. All copy is produced photographically.
Colors Available in black only
Standard Adhesive Pressure-sensitive acrylic adhesive
Sizes 2" x .625"; 2.5" x 0.75"; 2" x 1"
Holes Optional
Packaging Shipped in “work-out-of” cartons for convenient application. Each carton consists of one or more trays containing sequentially packed nameplates (nameplates may not always have a number and a quantity packaged can vary with metal thickness). Both cartons and trays are clearly marked to indicate serial numbers of contents. Pressure-sensitive adhesive orders are shipped with a roller, cleaner, and application instructions. Roller is recommended when applying nameplates.
Shipment 20-25 business days

Asset Tracking

OEM Product Identification

Destructive Test Summary
Test performed with Taber Abrader set at 500g per wheel, with Calibrase CS-17 wheels. Resists abrasion up to 7000 revolutions before wear-through on the Teflon® coating or anodized surface occurs.
Chemical Test Data
Barcode Readability Test Data
Chemical Result
Glass cleaner with ammonia no effect
DI water no effect
Isopropyl alcohol no effect
Bathroom cleaner no effect
Acetone no effect
Brake fluid no effect
Diesel fuel no effect
Caustic soda no effect
Nitric acid no effect
Hydrochloric acid no effect